Procedure for vacuum resin introduction method
- 1 Prepare the mold, apply the release agent
- 2 gelcoat, product layer (reinforcement material without resin)
- 3 Lay the release cloth
- 4 Lay the flow guide cloth and the flow guide tube
- 5 Paste the sealing rubber strip (can be in advance)
- 6 Lay the vacuum bag film
- 7 Install the vacuum valve, quick connector and vacuum tube
- 8 Connect to the air source, check the vacuum degree
- 9 Vacuum. Import resin
- 10 product curing
- 11 product stripping
operation diagram:
