Product Overview
The sheet is built in two layers: a gel coat face, cured against a polished tool for a smooth, high-gloss finish, and a glass-reinforced backing that carries the load. The gel coat provides weather, chemical, and abrasion resistance, while the laminate behind it supplies stiffness and impact strength. Fabricators cut, bond, and fasten the panels with standard tools, and gel-coat repairs blend well on site if the surface is damaged. UV-stabilized and flame-retardant options extend the range of service conditions.
An FRP gel coat sheet is a fiberglass-reinforced panel carrying a molded gel coat finish — a dense, pigmented surface layer that gives composite parts their durable, glossy face. It delivers a factory-finished surface without the labor, solvent, and defect risk of spraying gel coat in the shop. It is the practical choice for marine, sanitary, and architectural panels that must look good and last. Cinon Composites produces the sheet in a range of colors and gloss levels.
Specifications
| Parameter | Typical Value |
|---|---|
| Gel coat type | Isophthalic / [ ] polyester |
| Gel coat thickness | [ ] mm |
| Laminate glass content | [ ] % |
| Sheet thickness | [ ] mm |
| Gloss (60°) | [ ] |
| Color | [ ] (custom available) |
| Sheet size | [ ] mm × [ ] mm |
Values vary by grade — contact sales for the datasheet.
Applications
Finish marine interiors and exteriors
Bright, clean surfaces that resist salt and sun.
Build sanitary ware and wet areas
Seamless panels that shrug off moisture and cleaning chemicals.
Make signage and display panels
Consistent color and gloss across large areas.
Line truck and caravan bodies
Tough, glossy walls that stay presentable in service.
Key Advantages
Compared with in-shop spray gel coat, the molded sheet eliminates pinholes, runs, and solvent pop, and removes a process step from production. Compared with painted panels, the gel coat is part of the laminate and cannot peel or chip off in service. Buyers get repeatable color and gloss batch after batch, essential for serial production of visible components.
FAQ
Can the sheet be formed, or is it flat only?
Standard sheets are flat; formed and curved panels can be produced on request for volume programs.
How do I repair a damaged surface?
Gel coat paste matches the sheet color and blends after sanding and polishing; the Cinon Composites technical team provides repair guidance.
Are flame-retardant grades available?
Yes — fire-rated gel coat systems are offered; specify the standard you must meet.
— Cinon Composites Technical Team
